Sonax CC One

The Sonax CC One is the simplest and most user-friendly long-term ceramic coating available! The CC One consists of only 1 coating of which you only need to apply 1 coat. Because of this you are not spending a long time coating your car. You can treat an entire car in just 45 minutes!

The CC One is very easy to spread with the 4 included sponge applicators. There is enough product and applicators provided to treat 1 large SUV or 2 smaller cars. You can apply multiple coats of CC One to the paint but this will not double the lifespan. When applying 1 coat, Sonax anticipates a durability of 15 months. When applying 2 coats, we think we can achieve a realistic durability of 2 years if properly maintained! If you want to apply a second coat, we recommend leaving an hour and a half drying time between coatings.

To get the best performance and longest durability of the coating, it is important to give the paint a proper pre-treatment. This by washing the car extensively, removing iron particles and tar, giving a clay treatment and best also polishing the car. After that, it is necessary to degrease the paint with a surface degreaser such as Sonax Prepare.

When the car is prepared open the product and apply about 4-5 drops of Sonax CC One to the white side of the application sponge. With this you can treat an area of about 50x50cm. It is important to apply the product thinly on the surface in horizontal and vertical overlapping motions to ensure even distribution of the product. If the applicator sponge begins to harden, it is best to take a new applicator.

After about 5 minutes, the coating is ready to wipe off with a microfiber towel. We recommend a thick microfiber towel without edges such as the Custom Car Care Grey Edgeless Towel. After you have removed the coating with a microfiber towel, we recommend taking a new microfiber towel and going over the area again and an additional 10 inches outside the area to make sure you have removed everything. Periodically take a new, clean microfiber cloth and discard the old used microfiber cloths. The excess coating will harden in the microfiber cloth creating small crystals that will damage the paint when the microfiber cloth is next used.

After applying the coating, it is important to keep the car dry for the first 4 hours and not use any chemicals. Therefore, because this coating is so easy to use and dries quickly, it is the perfect solution for someone with little experience and those without a garage. You can apply this coating in a clean and dry place in the shade. Note that the warmer the climate the faster the coating will dry when you apply it. Because of this, the standard drying time of 5 minutes may become only 2 minutes. If you find that the coating is harder to take off, you may have to wipe it off faster.

The coating will continue to harden after the first 4 hours but will already be water resistant. However, to protect the coating in its first, most vulnerable hours, it is recommended that after 4 hours of drying time and before driving the car to quickly spray it with a ceramic spray such as the Sonax Ceramic Spray Coating. With this, the spray coating will protect the Sonax CC One. We also recommend not washing the car for the first week.